Home Class 50 Class 60 Class 80 Class 80 Compact Class 90 External Wiper Class 110..... Arms & Blades Trains Installation Control Panels Washer Systems Synchronised SolarGlide Oil Rigs & Cranes News Gallery Material Spec. Std Warranty Military RTB Warranty Contact Us Air Wiper

 

 

 

 

 

 

Class Air 100 Pneumatic Wiper

The Class Air 100 is powered by a air vane motor producing 106 Nm's of torque.
This replaces the electric motor used throughout the DuroWiper range and attaches
directly to our Patented Twin Drive Transfer Box. The torque is then delivered
equally between each drive shaft resulting in a smooth, powerful stroke. 

  

 Power up to 8,3 kW at 6 bar air pressure.  High nominal torques up to 1650 Nm. Speed of rotation as low as 7 rpm.
Variable and controllable speed and torque. Perfect for applications in hazardous environments.
ATEX certification ATEX II cat. 2 G&D T5 on request. No damage by overload or repeated starting.
Can be used in stall conditions.  Superior power to weight ratio.  Instantly reversible. Minimum maintenance
 High radial and axial loads permitted.

 

The motor can be operated in all positions. Airline filtration and lubrication: Use 64 micron filtration or better. Choose a lubricator
suitable for the flow required. Prior to start up, inject oil into the inlet port. Lubricator drop rate: 4-5 drops per minute continuous operation.
9-12 drops per minute intermittent operation. Polar Moment of Inertia: 0.77 lb.ins2 (0.226 g.m2). Maximum overhung force on shaft:

40 lbf (170N) In certain circumstances this may be extended. Consult your Globe Distributor. Axial loads should be kept down to a minimum.
Maximum temperatures: -4° to +176°  Fahrenheit.  (-20° to +80°C ).

 

TRANSFER BOX



AISI 316 Stainless Steel Twin Parallel Drive Shafts12 mm. Diameter AISI 316 Stainless Steel 12mm Spindles 60mm
Centres AISI 316 Stainless Steel Threaded Spindles M20 x 1mm Pitch 106Nm Nominal Torque Weight :- 15 Kilos.
Mild Steel 5mm Box Section Powder Coated to:- British Engineering Standard 005 Section 22.
2 x Inspection Panels (Low Density Polyethylene). 2 x 10mm Ball Bearing (Sealed)
2 x 10mm Needle Bearings. 12 x Oilite Bushes. 4 x G Seal Seals (Water Proof Seals).
2 x External Seals.

 

 

DUROWIPER CLASS AIR 100 90° PDF Drawing.

AIR PUMP WASHER SYSTEM



WINDOW WIPER
SYSTEMS
dURoWipers
dURoWipers Unit 20, Oldends Lane Ind.Est., Stonehouse. Gloucestershire. Gl10 3RQ
Tel: +44(0)844 8541 551- Fax:+44(0)844 8541 550 - sales@durowipers.co.uk - www.durowipers.co.uk
®